个性化3D打印手术导板辅助定位下血肿穿刺引流术在脑出血患者中的应用价值<sup>*</sup>

doi:10.3969/j.issn.1671-7171.2025.08.005

摘要
图/表
参考文献
相关文章 (15)

全文: PDF (1274 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要【目的】探讨血肿穿刺引流术中使用个性化3D打印手术导板进行辅助定位在脑出血患者中的应用价值。【方法】92例脑出血患者,随机分为两组,每组46例。观察组采用个性化3D打印手术导板辅助定位下血肿穿刺引流术,对照组采用CT定位下血肿穿刺引流术。比较两组患者手术情况、术后生活质量[健康调查量表36(SF-36)评分]、神经功能[美国国立卫生研究院卒中量表(NIHSS)评分],术后再出血及继发性脑水肿的发生情况。【结果】观察组定位时间短于对照组,剩余血肿体积低于对照组(P<0.05);观察组一次穿刺成功率、血肿清除率、引流管位置准确率均高于对照组(P<0.05);观察组术后1周SF-36总评分高于对照组(P<0.05),术后半年SF-36各维度及总评分均高于对照组(P<0.05);观察组术后半年NIHSS评分低于对照组(P<0.05);观察组术后再出血、继发性脑水肿发生率低于对照组(P<0.05)。【结论】个性化3D打印手术导板辅助定位下血肿穿刺引流术可有效提高术中定位准确度,缩短定位时间,提高一次穿刺成功率,改善脑出血患者的神经功能及生活质量,并能降低术后并发症发生率,值得临床推广应用。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张海坡
	何建军
	佘晓春

关键词 ：脑出血, 血肿, 穿刺术, 引流术

Abstract：【Objective】 To investigate the efficacy of personalized 3D-printed surgical guide plate-assisted localization of hematoma puncture and drainage in patients with cerebral hemorrhage.【Methods】A total of 92 patients with cerebral hemorrhage were randomly divided into two groups, with 46 cases in each. The observation group underwent hematoma puncture and drainage with the assistance of a personalized 3D-printed surgical guide plate, while patients in the control group received CT-guided hematoma puncture and drainage. Surgical parameters, postoperative quality of life (measured by the SF-36 scale), neurological function [National Institutes of Health Stroke Scale (NIHSS) score], and incidence of postoperative rebleeding and secondary cerebral edema were compared between the two groups.【Results】The observation group had a shorter localization time and smaller residual hematoma volume compared with the control group (P<0.05). The rates of first-attempt puncture success, hematoma clearance, and correct drainage tube placement in the observation group were significantly higher than those in the control group (P<0.05). One week after surgery, the SF-36 total score in the observation group was higher than that in the control group (P<0.05), and at six months postoperatively, all SF-36 dimensions and total scores were significantly higher in the observation group (P<0.05). Six months after surgery, the NIHSS score of the observation group was lower than that of the control group (P<0.05). The incidences of postoperative rebleeding and secondary cerebral edema were significantly lower in the observation group (P<0.05).【Conclusion】Personalized 3D-printed surgical guide plate-assisted localization in hematoma puncture and drainage can effectively improve intraoperative localization accuracy, shorten localization time, increase first-attempt success rate, enhance neurological function and quality of life in patients with cerebral hemorrhage, and reduce postoperative complications. It is worthy of clinical application and promotion.

Key words： Cerebral Hemorrhage Hematoma Punctures Drainage

收稿日期: 2024-12-19

中图分类号:

R743.34

基金资助:^*南通市课题基金(编号:JCZ2022003)

通讯作者: ^**E-mail:zhanghp_050166@sina.com

引用本文:

张海坡, 何建军, 佘晓春. 个性化3D打印手术导板辅助定位下血肿穿刺引流术在脑出血患者中的应用价值^*[J]. 医学临床研究, 2025, 42(8): 1311-1313.
ZHANG Haipo, HE Jianjun, SHE Xiaochun. Application of Personalized 3D-Printed Surgical Guide Plate-Assisted Hematoma Puncture and Drainage in Patients with Cerebral Hemorrhage. JOURNAL OF CLINICAL RESEARCH, 2025, 42(8): 1311-1313.

链接本文:

http://journal07.magtech.org.cn/yxlcyj/CN/10.3969/j.issn.1671-7171.2025.08.005 或 http://journal07.magtech.org.cn/yxlcyj/CN/Y2025/V42/I8/1311

[1] 魏文渊,别小华,韩超.影响高血压脑出血患者微创置管引流术后血肿未完全清除的相关因素[J].医学临床研究,2023,40(4):481-484.
[2] 吴磊,韩莹,赵锦程,等.3D打印技术在改善经鼻-蝶入路垂体腺瘤切除术患者垂体功能及并发症中的应用价值[J].河北医科大学学报,2022,43(12):1397-1401.
[3] 中华医学会神经病学分会,中华医学会神经病学分会脑血管病学组.中国脑出血诊治指南(2019)[J].中华神经科杂志,2019,52(12):994-1005.
[4] 周慧玲,曾嘉彦,陈冰.广东省工伤职业康复者SF-36量表评价参考值[J].中国康复医学杂志,2020,35(6):726-729.
[5] 贾丽娜,张海珍,白爱香.基于NIHSS评分的分组护理对脑出血患者术后神经康复和生活质量的影响[J].贵州医药,2019,43(10):1667-1669.
[6] 鲁春鹤,徐静,熊锴,等.3D打印手术导板结合混合现实技术在复杂高血压脑出血穿刺引流术中的临床应用[J].中华神经外科疾病研究杂志,2024,18(2):40-44.
[7] 阿木约布,肖飞,沙马拉罗,等.3D打印导板辅助穿刺引流术治疗高血压性脑出血[J].中国临床神经外科杂志,2023,28(2):116-117.
[8] 孙应辉,赵新春.血清骨膜蛋白、透明质酸与急性自发性脑出血预后的相关性研究[J].医学临床研究,2023,40(1):74-77.
[9] 田晓玲,朱婷婷,王静,等.3D打印导板辅助治疗高血压脑出血手术患者的效果观察及围术期护理[J].齐鲁护理杂志,2023,29(2):91-93.
[10] 宋燕飞,王同聚,王建格,等.基于虚拟现实技术的3D打印器具辅助穿刺引流术治疗高血压脑出血的疗效评价及其在医患沟通中的作用[J].脑与神经疾病杂志,2024,32(11):691-695.
[11] 夏明,李文化,鲍波,等.3D打印辅助下经额穿刺引流术治疗高血压性基底节出血的效果[J].中国临床神经外科杂志,2022,27(1):37-38.
[12] 吕东,朱盛,黄文强,等.3D打印导板辅助血肿穿刺置管引流治疗中等量基底节区高血压脑出血的临床研究[J].中国基层医药,2022,29(12):1777-1782.
[13] 杜洪澎,李珍珠,李泽福,等.3D打印导板技术在脑出血微创穿刺引流术中的应用[J].中华神经医学杂志,2016,15(7):674-677.
[14] 刘锋,李海马,张毓,等.3D打印导板引导下精准穿刺引流治疗高血压脑出血的临床研究[J].立体定向和功能性神经外科杂志,2020,33(3):186-188.